Calco Poly Technik

Home / Industries / Appliances and consumer durables

Housings, gears and internals that run for years.

Power-tool housings, fan and mixer-grinder components, washing-machine and air-conditioner parts, water-purifier components, small-appliance housings and gears. The part decides the family: polyamide where it is loaded and hot, polypropylene where chemicals and cost lead, polycarbonate alloys where it is seen and dropped.

Where to start, part by part.

Grades are starting points. We confirm the choice against your part, standard and wall thickness, and send a free 25 kg trial lot.

PartOur recommendationGrades to start fromFamily
Power-tool housingsPA6 with 30% glass fibre: stiffness, impact and heat near the motor710C3031710C3001CiLON®
Appliance and electrical housings in PP with a fire ratingUnfilled, talc- or mineral-filled flame-retardant PP500C0031F500C2131F500C3131FHiLENE®
Appliance housings and internals where weight and cost leadGlass-, talc- and mineral-reinforced PP500C2031500C3031510C2131510C3131HiLENE®
Small-appliance gears and housingsUnfilled and glass-reinforced PBT: precision, low moisture uptake730C0031730C3031ZiLITE®
Appliance and business-machine housingsPC/ABS: impact, flow and paintability; flame-retardant where required760C6031760C6081FPiCAN®
Black structural internals, cost-drivenRecycled-content PA6 with 30% glass fibre711C3001eCiLON®

Notes for the designer and the moulder.

Unattended appliances

Unattended appliances typically call for a glow-wire flammability index of 960 °C and a glow-wire ignition temperature of 750 °C or 775 °C. Tell us the standard and the wall thickness.

Detergents and hot water

PP resists detergents and electrolytes. Long exposure to water above about 60 °C hydrolyses PBT, so specify PP or NovaLYN™ mPPE for hot-water contact.

Regrind

HiLENE® is fully recyclable; regrind can be blended with virgin material after validating the mix for the application.

Try it on your own press.

A free 25 kg trial lot compounded on production lines, and a Calco engineer at your press.

Request a sample