Calco Poly Technik

Home / Industries / Automotive

We start from the part, not from the polymer.

Since 1999, Calco has developed compounds for parts that have to work hard: under the hood, inside the gearbox, behind the dashboard and throughout the electrical architecture of the vehicle.

Glass-fibre reinforced polyamide air intake manifold
230 °Cshort-term engine-bay temperature peaks
Vibrationsustained mechanical and vibration loads
Fluidsfuels, oils, coolants and road salt
Tolerancestight fits on demanding geometries

Under the hood, in series today

The problem your part has to solve, and the grade we recommend.

Tap a part in the engine bay to see what goes wrong with it and the grades we would start from.

Engine bay with moulded polymer components

Where our materials work

From the front bumper to the rear lamp.

Every application carries a status, so a material engineer can see what Calco supplies today and what can be specified now.

In production: grades in series supply for the named part. Ready to specify: validated grades with data sheets and trial quantities available; part-specific validation is run with you. In development: grades, colours and references being built with OEM and Tier-1 partners.

How we recommend a material

From your problem to our grade, in five questions.

  1. How hot, how long?

    Decides the base polymer and the heat-stabiliser package.

  2. What does it touch?

    Fuel, oil, coolant, salt: decides hydrolysis resistance and often the polymer family.

  3. What loads, for what life?

    Decides reinforcement type and level, and impact modification.

  4. How is it made?

    Wall thickness, flow length, welding: decides flow, filler and weldability.

  5. What must it comply with?

    Fire rating, emissions, colour, recycled content, IMDS.

One named grade, and the alternative

The grade we recommend, the reason it fits, and the grade we would move to if temperature, cost or colour changes. Never a list to choose from.

We tell you when the obvious material is the wrong one

When hot coolant argues for mPPE over polyamide, when a Class-A surface argues against 30% glass, or when a lower-cost grade will pass your test.

Supplied under IATF 16949.

PPAP documentation, IMDS material data and a test certificate with every lot. Trial quantities from stock for standard grades.

Request a sample