Calco Poly Technik

Home / Materials / Choosing a family

Shortlist by property, then select the grade.

Four questions usually decide the polymer family. Use them to narrow to one or two families, then pick the grade and confirm against its technical data sheet.

Four questions that usually decide it.

How hot, for how long?

Above 120 °C continuous: PA66 or heat-stabilised PA6; peaks near 200 °C: PA66 HS. Below 100 °C, PP or PC alloys may be the economical choice.

What will it sit in?

Fuels and oils: polyamide. Hot water, coolant, steam: mPPE, PP or hydrolysis-resistant PA66. Solvents and detergents: PP and PBT.

How tight is the tolerance?

Parts that must hold dimensions through humidity cycling favour PBT, mPPE or PC alloys over unmodified polyamide.

Is there a fire or electrical rating?

UL 94, glow-wire and CTI requirements select the flame-retardant sub-ranges of each family.

Still between two families?

Tell us the part and what it has to survive. We name one grade, and the alternative.

Request a sample