Home / Automotive / Under the hood
Where performance begins.
Beneath the hood, several systems work continuously to keep the vehicle running efficiently, reliably and safely. From managing incoming air and engine fluids to controlling temperature, every system operates in a demanding environment, and so does every polymer part inside it.
What the material must deliver.
High heat resistance
Maintains performance and structural integrity at engine-bay temperatures, including short-term peaks.
Chemical resistance
Withstands oils, fuels, coolants and other automotive fluids for long-lasting durability.
Dimensional stability
Retains its shape and function across the full range of temperature and humidity.
Weight reduction
Enables lighter components, improving fuel efficiency and overall vehicle performance.
Corrosion-free performance
No rust, no galvanic corrosion: longer part life and reliable operation.
Design flexibility
Complex geometries and part integration to meet evolving automotive needs.
In production
In series today, part by part.
Each page gives the problem the part has to solve, what usually goes wrong, the grade we recommend and how we validate it with you.
Air intake manifolds
Flange cracking after thermal cycling where weld lines and fibre orientation meet the bolt bosses.
OpenAir filter housings
Latch and hinge fracture once the polymer has embrittled with heat ageing.
OpenRadiator end tanks, cooling pipes and connectors
End-tank cracking at the crimp foot or hose spigot after coolant ageing.
OpenEngine covers and cylinder-head covers
Sink marks, fibre read-out and gloss variation on the visible engine cover.
OpenFan and shroud
Blade-root fatigue cracking after long service or overspeed.
OpenCable ties
Brittle straps from under-conditioned or over-dried material, or the wrong viscosity for the tool.
OpenMore under-hood applications, ready to specify.
These applications share the same requirement set of heat, oil, coolant and vibration, and are served from the same validated grades, with trial quantities and data sheets available now.
| Application | Our recommendation | Grades to start from | Family | Status |
|---|---|---|---|---|
| Cylinder-head covers and cam covers | PA66 GF35 HS: oil and heat resistance, gasket flatness | 720C3005HS720C3032 | CiLON® | Ready to specify |
| Oil pans, oil filter housings and modules | PA66 GF35 HS: oil ageing, stiffness, impact | 720C3005HS720C3004 HSHD | CiLON® | Ready to specify |
| Thermostat and water-pump housings | mPPE GF30 or PA66 GF30 HR: hot glycol without hydrolysis | 620D3031720C3004 HSHD | NovaLYN™ CiLON® | Ready to specify |
| Coolant quick connectors and fittings | PA66 GF30 HR HS: burst and pull-off after coolant ageing | 720C3004 HSHD720C3004 HS | CiLON® | Ready to specify |
| Charge-air and clean-air ducts | PA6 GF30 HS, high flow: pressure pulsation on thin walls | 710C2031 HFHS710C3001 | CiLON® | Ready to specify |
| Engine-mount and accessory brackets | PA66 GF50–60: stiffness and fatigue replacing aluminium | 720C5031720C6031 | CiLON® | Ready to specify |
| Battery trays and hold-downs (12 V) | PP GF30 or PA6 GF30: acid resistance, stiffness, cost | 500C3001710C3001711C3003 | HiLENE® CiLON® eCiLON® | Ready to specify |
| Fuse-box and ECU brackets | PA6 GF30 or PA66 GF30: vibration stiffness at low cost | 710C3001720C3004 | CiLON® | Ready to specify |
| Harness clips, grommets and cable channels | PA66 unfilled HS, PA6 unfilled: flexibility and heat routing | 720C0001HS710C0001 | CiLON® | Ready to specify |
In production: grades in series supply for the named part. Ready to specify: validated grades with data sheets and trial quantities available; part-specific validation is run with you. In development: grades, colours and references being built with OEM and Tier-1 partners.
Design and processing notes.
Oil-side parts: PA66 HS
Cam covers, oil pans and filter modules run hot in oil mist for the life of the engine; specify heat-stabilised PA66 and validate after oil ageing to the OEM specification.
Coolant-side parts: HR or mPPE
For hot glycol under pressure choose hydrolysis-resistant PA66 or NovaLYN™ mPPE; standard PA66 GF loses strength after long coolant exposure.
Brackets: go higher on glass
Engine-mount and accessory brackets replacing aluminium need PA66 GF50–60 and generous ribbing; validate under conditioned, not dry-as-moulded, values.
Supplied under IATF 16949.
PPAP documentation, IMDS material data and a test certificate with every lot.
