Calco Poly Technik

Home / Automotive / Interior

Comfort you can feel, quality you can't see.

Interior components live in a wide temperature window, from a frozen winter morning to a cabin parked in summer sun, and are judged on feel, fit and silence. Structural and mechanism parts must be stiff and dimensionally stable; visible parts must be low in odour and emissions and resist scratches over years of use.

What the material must deliver.

Wide service temperature

Dimensional stability from –40 °C to +85 °C so mechanisms stay smooth and panels stay flush.

Low odour and emissions

Formulated for low VOC and fogging in the cabin environment.

Stiffness for mechanisms

Glass-reinforced grades for seat adjusters, recliners, lock components and column parts.

Weight and cost

Talc-, mineral- and glass-reinforced PP for carriers, housings and flaps where peak temperature is moderate.

Our recommendation, application by application.

ApplicationOur recommendationGrades to start fromFamilyStatus
Seat adjuster and recliner componentsPA66 GF30: strength and creep for occupant loads720C3004720C3034CiLON®Ready to specify
HVAC housings and air-distribution flapsPP TF20–30, PP GF20, PA6 GF15 with recycled content: flat, quiet, low cost510C2131510C3131500C2001712D1004-6HiLENE® ReViveX®Ready to specify
Door-handle inners and lock componentsPA66 GF30: snap-fit toughness and wear720C3004CiLON®Ready to specify
Instrument-panel carriers and bracketsPP GF30, PP TF15 GF15, PA6 GF30: stiffness with low warpage500C3001500C3301710C3001HiLENE® CiLON®Ready to specify
Steering-column and airbag housing componentsPA6 GF30, PA66 GF30: impact and burst strength710C3001720C3004CiLON®Ready to specify
Sunroof mechanisms and seat-belt componentsPA66 GF30: wear and load-bearing precision720C3004CiLON®Ready to specify
Visible trim, bezels and console partsPC/ABS, PP TF20: grain, gloss and scratch resistance760C6001760C6031510C2131PiCAN® HiLENE®Ready to specify
Display, cluster and controller housingsPC/ABS FR, PC FR: V-0 with impact760C6081F750C0031FPiCAN®In development

In production: grades in series supply for the named part. Ready to specify: validated grades with data sheets and trial quantities available; part-specific validation is run with you. In development: grades, colours and references being built with OEM and Tier-1 partners.

Design and processing notes.

Agree emissions targets early

Low-VOC and fogging requirements (VDA 277 / VDA 278) shape the additive package. Fix the target before the grade is fixed.

Manage warpage on long, flat parts

For carriers and flaps, talc–glass hybrid PP or glass–mineral polyamide reduces differential shrinkage and keeps panels flat.

Specify grain and gloss

For visible parts, PC/ABS and talc-filled PP reproduce texture more faithfully than glass-reinforced grades.

Supplied under IATF 16949.

PPAP documentation, IMDS material data and a test certificate with every lot.

Request a sample