Calco Poly Technik

Home / Materials / FlamSaf®

Solution brand for fire safety

FlamSaf®

Rated at the wall you actually mould.

Flame-retardant compounds under UL file E541646, built for 960 °C glow-wire and rated at the part's thinnest wall. In series in breaker housings since 2023.

Typical parts

Mcb and rccb cases and coversIsolatorsArc-chamber surroundsTrip partsKnobsHandles and terminal blocks

FlamSaf® grades

Mineral-rich grades keep riveted shells flat; glass-rich grades take the heat around the arc chamber. UL 94 and glow-wire depend on thickness, so we test at your thinnest wall before the trial.

What it offers

  • Glow-wire flammability 960 °C for parts holding live terminals
  • UL 94 and glow-wire confirmed at your thinnest wall before the trial
  • Mineral–glass balance tuned per part for flat, riveted shells
  • Colour built on the flame-retardant base against your plaque: ΔL, Δa and Δb within 0.8
  • In series with switchgear makers since 2023
FlamSaf®PA6

710C2383F4

PA6, 20% mineral + 5% glass fibre, flame retardant

Typical parts: MCB and RCCB case and cover, isolators

UL 94 V-2 at 3.2 mmGlow-wire gradeHDT ≥ 150 °CLight grey
FlamSaf®PA6

710C2383F2A

PA6, mineral + glass fibre, flame retardant, high flow

Typical parts: Thin-wall and multi-cavity breaker housings

UL 94 V-2High flow
FlamSaf®PA6

710C2283F4

PA6, 20% mineral, flame retardant

Typical parts: Flattest MCB shells

UL 94 V-2Low warpageLight grey
FlamSaf®PA6

710C2082F1 / 710C2082F2

PA6, 20% glass fibre, flame retardant

Typical parts: Arc-chamber surround, trip parts

UL 94 V-0HDT 180–190 °C
FlamSaf®PA6

710D2011F

PA6, 25% reinforced, flame retardant

Typical parts: High-HDT trip and mechanism parts

UL 94 V-2HDT 185–195 °C
FlamSaf®PA6

710C0031F / 710C0001F

PA6, unfilled, flame retardant, halogen free

Typical parts: Knobs, handles, terminal blocks

Halogen freeNatural / black
FlamSaf®PA66

720C0031F / 720C0001F

PA66, unfilled, flame retardant, halogen free

Typical parts: Knobs, handles, terminals

Halogen freeNatural / black

Design and processing notes.

Ask for the rating at your wall

UL 94 and glow-wire results depend on thickness. Confirm the rating at the part's minimum wall.

Run at the low end

Flame-retardant packages narrow the processing window: keep melt temperature and residence time down, and avoid hot-runner dead spots.

Agree colour on the FR base

Flame-retardant fillers shift the base colour. Match greys and whites against a plaque of the FR grade, not the natural grade.

Typical starting conditions for injection moulding.

FamilyDryingMax. moistureMelt temperatureMould temperature
CiLON® / eCiLON® PA680 °C, 4–6 h≤ 0.10%240–270 °C60–90 °C
CiLON® / eCiLON® PA6680 °C, 4–6 h≤ 0.10%275–295 °C70–100 °C

Starting points for standard reinforced grades. The grade data sheet and, where issued, the product-specific processing sheet take precedence: flame-retardant, high-flow and alloy grades run in narrower windows.

Processing guidelines for every family

Try FlamSaf® on your own press.

A free 25 kg trial lot compounded on production lines, and a Calco engineer at your press.

Request a sample