Calco Poly Technik

Home / Automotive / Battery and high-voltage

Growth programme

Insulate, hold, connect.

A traction battery is an electrical cabinet on wheels: hundreds of cells held in insulating frames, busbars carried on insulators, connectors that must never track, and housings that must not burn. The material set is flame-retardant, high-CTI, dimensionally stable and, for anything the service technician must recognise as high voltage, reliably orange.

What the material must deliver.

Flame retardancy

Flame-retardant grades rated UL 94 V-0 at the part's minimum wall, in halogen-free systems where OEM requirements exclude halogens.

Tracking resistance

CTI of 600 V or more (PLC 0) allows compact creepage distances in 400 V and 800 V architectures.

Heat and thermal-event resistance

Heat-stabilised grades that keep insulation and structure through pack operating temperatures and short thermal excursions.

Colour and identification

Orange colour-matched to RAL 2003 or the OEM standard, with colour stability after heat ageing; laser-markable for traceability.

Our recommendation, application by application.

ApplicationOur recommendationGrades to start fromFamilyStatus
Battery-module end plates and framesPA66 GF30–35 FR, PBT GF30 FR: V-0 structure under cell compression720C3001F721C3005F730C3001FCiLON® eCiLON® ZiLITE®In development
Cell holders and spacersPC/ABS FR, PBT GF FR: thin-wall V-0 insulation760C6081F730C3031FPiCAN® ZiLITE®In development
Busbar carriers and insulatorsPA66 GF30 FR, PBT GF30 FR, orange: CTI of 600 V or more for creepage720C3001F730C3031FCiLON® ZiLITE®In development
High-voltage connector housings and coversPBT GF30 FR, PA66 GF30 FR, orange: tracking and latch retention730C3001F720C3001FZiLITE® CiLON®In development
Charging inlets and socketsPBT GF30–50 FR, UV-stabilised: V-0, weathering, stiffness730C3001F730C5001FZiLITE®In development
BMS, junction-box and controller housingsPC/ABS FR, FR PC: V-0 with impact and flow760C6081F750C0031FPiCAN®In development
High-voltage harness clips, ties and conduits, orangePA66 unfilled HS, PA6 unfilled, orange: identification, heat routing720C0001HS710C0001CiLON®In development
Battery trays and pack covers, low-voltage sidePP GF30, PA6 GF30: stiffness, acid resistance, cost500C3001710C3001HiLENE® CiLON®Ready to specify

In production: grades in series supply for the named part. Ready to specify: validated grades with data sheets and trial quantities available; part-specific validation is run with you. In development: grades, colours and references being built with OEM and Tier-1 partners.

Design and development notes.

Specify the electrical test set

Agree UL 94 thickness, CTI class, dielectric strength and glow-wire requirements before the grade is chosen; they drive the flame-retardant package.

Orange is a formulation, not a paint

Orange flame-retardant grades are colour-matched on the FR base and validated for colour hold after heat ageing; agree the standard plaque early.

Thin walls, long flow

Cell holders and carriers are large, thin and heavily ribbed; high-flow flame-retardant grades and hot-runner layouts that avoid dead spots keep the rating and the cycle.

Supplied under IATF 16949.

PPAP documentation, IMDS material data and a test certificate with every lot.

Request a sample