Home / Automotive / Exterior
Built for the elements, finished for the eye.
Exterior parts face sun, rain, road salt, car-wash chemicals and stone impact, and are expected to keep their gap-and-flush fit and their finish through it all. Reinforced polyamide, PBT, PP and PC alloys bring the stiffness, weathering resistance and low-temperature toughness these parts need, in painted or moulded-in-colour form.
What the material must deliver.
UV and weathering
UV-stabilised grades hold colour, gloss and mechanical properties through years of exposure.
Chemical resistance
Resistant to road salt, fuel splash, washer fluid and car-wash detergents.
Low-temperature impact
Impact-modified and PC-alloy options keep toughness at –30 °C for handles, trims and brackets.
Dimensional stability
Low warpage and low moisture uptake (PBT, PC/PBT and mPPE) for gap-and-flush on mirror housings and lamps.
Our recommendation, application by application.
| Application | Our recommendation | Grades to start from | Family | Status |
|---|---|---|---|---|
| Mirror housings and brackets | PBT GF30, PA6 GF30: low warpage for gap-and-flush; PBT/PET GF45 with recycled content as an option | 730C3001710C3001740C4001-4 | ZiLITE® CiLON® ReViveX® | Ready to specify |
| Wiper arms, linkages and motor housings | PBT GF30, PA66 GF30: stiffness, wet-weather stability | 730C3001720C3004 | ZiLITE® CiLON® | Ready to specify |
| Wheel trims and covers | ReViveX® PA66 MF15 HS IM with 20% PIR: paintable, high HDT; PA6 GF15 | 722D1101HSIM710C1001 | ReViveX® CiLON® | Ready to specify |
| Grille, bumper and lamp brackets | PP GF30, PA6 GF30: stiffness at low cost, –30 °C impact | 500C3001710C3001711C3003 | HiLENE® CiLON® eCiLON® | Ready to specify |
| Exterior door handles | PA6 GF30, PC/PBT GF10: toughness, paintability, chemical resistance | 710C3001760C1001 | CiLON® PiCAN® | Ready to specify |
| Fuel-filler flaps and housings | PA6 GF, PBT GF: fuel resistance and flatness | 710C3001730C3001 | CiLON® ZiLITE® | Ready to specify |
| Roof rails and rack components | PA6 GF30: load-bearing stiffness, UV stabilised | 710C3001 | CiLON® | Ready to specify |
| Two-wheeler side panels, covers and mudguards | PP TF20–30, PP GF20: impact, UV, colour in mould | 510C2131510C3131500C2001 | HiLENE® | In development |
In production: grades in series supply for the named part. Ready to specify: validated grades with data sheets and trial quantities available; part-specific validation is run with you. In development: grades, colours and references being built with OEM and Tier-1 partners.
Design and processing notes.
UV protection is a grade property
For unpainted parts, specify UV-stabilised black or colour-matched grades; the stabiliser package is matched to the OEM weathering test.
Prove cold impact on the part
Validate low-temperature impact on the moulded part, not only the test bar: wall thickness, gate position and fibre orientation all matter.
Hold gap-and-flush with low-uptake polymers
For mirror housings and lamp bezels, PBT (ZiLITE®), PC/PBT (PiCAN®) or mPPE (NovaLYN™) hold dimensions across humidity better than polyamide.
Supplied under IATF 16949.
PPAP documentation, IMDS material data and a test certificate with every lot.
