Home / Company / Quality and laboratory
Measured after compounding. Documented with every lot.
Every Calco grade is moulded into test specimens and characterised in our NABL-accredited laboratory after compounding. Reference granulate and colour standards are retained for each grade, so a batch can be reproduced, and compared, at any time.
Laboratory capability.
Mechanical
Tensile, flexural, notched and unnotched impact, hardness
Thermal
Heat deflection temperature, Vicat, melting behaviour, heat ageing
Flammability
UL 94 vertical and horizontal burn, glow-wire flammability and ignition
Electrical
Comparative tracking index, dielectric properties
Rheological
Melt flow rate, viscosity, moisture content
Physical
Density, ash and filler content, moulding shrinkage, water absorption
Colour
Spectrophotometric colour matching and tolerance control against retained standards
Moulding
In-house injection moulding for specimens, plaques and customer trials
Documentation with every grade.
Technical data sheet
Typical properties to ASTM and ISO methods, processing conditions and part-marking designation, revision-controlled.
Safety data sheet
GHS-format safety data sheet for every grade, built from the verified composition of the formulation.
Batch test certificate
Measured values against specification limits for each production lot, issued with the delivery.
Declarations
Material data for IMDS, RoHS and REACH statements and recycled-content declarations for grades that require them.
The methods behind the data sheet.
| Property or test | Method | Notes |
|---|---|---|
| Tensile strength, modulus and elongation | ISO 527 / ASTM D638 | Dry-as-moulded and conditioned to ISO 1110 |
| Flexural strength and modulus | ISO 178 / ASTM D790 | — |
| Notched and unnotched impact | ISO 179, ISO 180 / ASTM D256 | Charpy and Izod at 23 °C and –30 °C |
| Heat deflection temperature | ISO 75 / ASTM D648 | 1.8 MPa and 0.45 MPa |
| Melt flow rate and viscosity | ISO 1133 / ASTM D1238 | — |
| Density, moisture and ash content | ISO 1183, ISO 15512, ISO 3451 | — |
| Moulding shrinkage | ISO 294-4 / ASTM D955 | Flow and cross-flow |
| Flammability | UL 94; IEC 60695-2-12 and -13 | Vertical and horizontal burn; GWFI and GWIT |
| Comparative tracking index | IEC 60112 | PLC class per UL 746A |
| Heat ageing, coolant and oil ageing | OEM specification | Property retention after ageing in air, coolant, oil and fuel |
| Emissions and fogging | VDA 277, VDA 278, DIN 75201 | Interior grades |
| Weathering | SAE J2527, ISO 4892 | Exterior and lamp grades |
| Part marking and designation | ISO 11469, ISO 1043 | Grade name printed on the part |
Data sheets report typical values in ASTM or ISO format as your specification requires. Part-specific validation against OEM material standards is run with you during approval.
Change control
No silent changes.
Once your grade is approved, it stays the grade you approved, whoever moulds your parts.
Management of change
Any deviation is signed off before it reaches you.
4M records
Man, machine, material and method recorded for production lots.
Retained references
Reference granulate and colour plaques kept for every grade.
Traceable bags
QA-approved labels link each bag to its lot and test certificate.
Audit us.
Witnessed testing in our laboratory, at third-party laboratories, or at your plant.
