Calco Poly Technik

Home / For OEMs

For OEMs and design engineers

Qualify us with the evidence your quality team asks for.

An IATF 16949 quality system, a NABL-accredited laboratory, a UL-recognised flame-retardant range and the documents a global OEM approval needs. Offered to every customer, not only the largest.

12/12points closed in a switchgear OEM's supplier audit
0.8 mmGWFI 960 °C and UL 94 V-2 verified at the real wall
ΔE ≤ 0.5colour against your plaque, measured on every lot
E541646our UL file for flame-retardant compounds

The qualification pack

Every document your approval needs, ready before you ask.

Built from what global OEMs asked us for, and now standard for every customer.

  • Technical data sheet
    with declared recycled content where it applies
  • Safety data sheet
    GHS format, every grade
  • RoHS, REACH and IMDS
    declarations and material data
  • UL yellow card
    for UL-listed flame-retardant grades
  • Test data at your wall
    glow-wire, UL 94 and CTI on plaques at your thickness
  • DSC fingerprint report
    resin, recycled input and masterbatch checked against reference
  • Colour report
    ΔL, Δa, Δb against your own plaque, before and after ageing
  • PPAP documents
    with a frozen reference batch

How qualification runs

Plan for six months. We support every step.

Global OEMs typically validate a new material for at least six months after technical and commercial acceptance.

  1. Specification review

    Part, product standard, colour, target volume.

  2. One named grade

    With the reason it fits and data at your wall thickness.

  3. 25 kg trial lot

    Made on production lines, free of charge.

  4. Witnessed testing and audit

    In our laboratory, at third-party labs, or at your plant.

  5. PPAP and approval

    Frozen specification and reference batch.

  6. Series supply

    A test certificate with every lot, to you or your moulder.

Change control

No silent changes. Ever.

Once your grade is approved, it stays the grade you approved, whoever moulds your parts.

Management of change

Any deviation is signed off before it reaches you.

4M records

Man, machine, material and method recorded for production lots.

Retained references

Reference granulate and colour plaques kept for every grade.

Traceable bags

QA-approved labels link each bag to its lot and test certificate.

Case study · a global switchgear OEM

It did not go right first time. That is why it matters.

Our first samples for an MCB case and cover failed on colour value and colour after ageing. We reformulated with recycled-content grades and a new pigment, matched the OEM's plaque, and then passed GWFI 960 °C and UL 94 V-2 at 0.8 mm, where the incumbent material did not.

The tests that tripped us up are now standard practice for every customer.

Case study · an Indian switchgear OEM

An audit that changed how we run our plant.

This OEM qualifies the plant, not only the pellet. Nine of twelve audit points were closed on the day and three process points within the month. Third-party tests on our 30% glass FR PBT measured CTI 450 V and dielectric strength of 33.9 kV/mm.

The grade is in series supply, and a second colour has followed.

Start a qualification.

Tell us the part and the standard. We reply with a named grade, the data at your wall thickness and the documents for your approval.

References from existing OEM customers are available on request, with their permission.

Request a sample