Home / Automotive / Electrical and electronics
Connected, protected, ready to electrify.
A modern vehicle's electrical architecture carries more power, more signals and more heat than ever. Connector housings, sensor bodies, fuse boxes and harness fixings need dimensional precision, reliable electrical performance and, increasingly, flame retardancy for high-voltage battery and charging systems.
What the material must deliver.
Dimensional precision
Low-warpage PBT and PA66 grades hold terminal cavities and latch geometry through humidity and thermal cycling.
Electrical performance
High CTI and dielectric strength; halogen-free flame-retardant options rated UL 94 V-0.
Heat ageing
Heat-stabilised grades for components mounted on motors, alternators and near the exhaust.
Electrification
Flame-retardant polyamide, PBT and PC alloys for battery, busbar and charging components.
Our recommendation, application by application.
| Application | Our recommendation | Grades to start from | Family | Status |
|---|---|---|---|---|
| Connectors and terminal housings | PBT GF15–30, PA66 GF25–30: cavity precision, latch strength | 730C1031730C3031730C3001720C3004 | ZiLITE® CiLON® | Ready to specify |
| Sensor and actuator housings | PBT GF30, PA66 GF30: stability under thermal cycling | 730C3001720C3004 | ZiLITE® CiLON® | Ready to specify |
| Fuse and relay boxes | PA66 GF15–30 FR, PP FR: fire rating with impact | 720C1001F720C3004500C0031F | CiLON® HiLENE® | Ready to specify |
| Wire-harness clips, ties and conduits | PA6 and PA66, unfilled and heat-stabilised: flexibility and heat routing | 710C0031A720C0031A720C0001HS | CiLON® | In production |
| Lamp housings and bezels | PBT GF20–30, PC/ABS: heat, gloss, dimensional accuracy | 730C3001760C6001 | ZiLITE® PiCAN® | Ready to specify |
| Motor, alternator and starter components | PA66 GF30 HS, PBT GF30: heat ageing on the motor | 720C3004 HS720C3005HS730C3001 | CiLON® ZiLITE® | Ready to specify |
| Flame-retardant connector and relay housings | PBT GF30 FR, PA66 GF30 FR: V-0 with high CTI | 730C3031F730C3001F720C3001F | ZiLITE® CiLON® | Ready to specify |
| Battery-module, busbar and charging components | FR PA66, FR PBT, PC/ABS FR: high-voltage insulation, orange | 720C3001F721C3005F730C3001F760C6081F | CiLON® eCiLON® ZiLITE® PiCAN® | In development |
In production: grades in series supply for the named part. Ready to specify: validated grades with data sheets and trial quantities available; part-specific validation is run with you. In development: grades, colours and references being built with OEM and Tier-1 partners.
Design and processing notes.
Select by retention test
PBT holds cavity dimensions through humidity cycling; PA66 GF gives higher latch strength. Select against the connector standard (USCAR-2, LV 214).
Fix FR, CTI and glow-wire at design freeze
Halogen-free flame-retardant grades reach UL 94 V-0 at thin walls; confirm CTI, GWFI and GWIT requirements before tooling.
Plan for traceability
Where parts are laser-marked after moulding, specify a laser-markable grade so contrast and legibility are built into the compound.
Supplied under IATF 16949.
PPAP documentation, IMDS material data and a test certificate with every lot.
