Calco Poly Technik

Home / Materials / NovaLYN™

Modified polyphenylene ether

NovaLYN™

For hot coolant, steam and dimensions that must not move.

Modified PPE absorbs almost no water, holds its dimensions across humidity and temperature, and shrugs off hot glycol coolant and steam that would hydrolyse polyamide or PBT. NovaLYN™ brings those properties to glass-reinforced compounds for cooling-system, fluid-handling and battery-system parts, with the lowest density in the engineering-polymer range.

Typical parts

Radiator end tanksCooling pipes and connectorsFan shroudsWater-pump housingsThermostat housingsBattery-module componentsPump and valve parts

NovaLYN™ grades

NovaLYN™ is the newest Calco family. Additional reinforcement levels, unfilled and flame-retardant grades are in development; ask us for the current range.

What it offers

  • Outstanding hydrolysis and glycol resistance
  • Very low water absorption; high dimensional stability
  • Low density: lighter parts than PA or PBT equivalents
  • Good heat resistance and creep performance
  • Good electrical properties
NovaLYN™mPPE

620D3031

Modified PPE, 30–35% glass fibre, hydrolysis and glycol resistant

Typical parts: Radiator end tanks, cooling pipes, fan shrouds

Hydrolysis-resistantLow densityBlack

Design and processing notes.

Hot coolant and steam

Polyamide loses strength after long exposure to hot glycol; mPPE does not hydrolyse. For end tanks and pipes with a 15-year life, that difference decides the material.

Dimensions that must not move

With near-zero moisture uptake, mPPE parts measure the same conditioned as dry: useful where crimp seals, quick-connects and gaskets depend on geometry.

Every gram counts

At roughly 10% lower density than glass-reinforced PA66, NovaLYN™ parts are lighter at equal wall thickness.

Where it is not the answer

Fuels, oils and aromatic solvents attack mPPE; for intake, fuel and oil-side parts, CiLON® polyamide remains the right choice.

Typical starting conditions for injection moulding.

FamilyDryingMax. moistureMelt temperatureMould temperature
NovaLYN™ mPPE100 °C, 2–4 h≤ 0.05%280–310 °C80–110 °C

Starting points for standard reinforced grades. The grade data sheet and, where issued, the product-specific processing sheet take precedence: flame-retardant, high-flow and alloy grades run in narrower windows.

Processing guidelines for every family

Try NovaLYN™ on your own press.

A free 25 kg trial lot compounded on production lines, and a Calco engineer at your press.

Request a sample