The problem
A target without a material
Your customer has set a recycled-content target, and the part still has to pass the same tests.
Recycled grades that vary
A recycled compound is only useful if the tenth lot behaves like the first.
A claim you cannot document
Without a declaration, the content cannot be reported.
The impact
A sustainability claim that fails an audit, or a part that fails its type test.
The solution
What we do about it.
Fingerprint every input
DSC thermal fingerprint of resin, recycled input and masterbatch, checked against a reference.
Same release standard
Every lot is tested to the same inspection standard and colour tolerance as virgin grades.
Proven on a fire rating
A recycled-content flame-retardant PA6 passed GWFI 960 °C and UL 94 V-2 at 0.8 mm in an OEM head-to-head test.
Declared and documented
A recycled-content declaration is issued with the grade, so the part can carry the claim into your reporting.
Two routes to recycled content.
Recycled-content polyamide
eCiLON®
Polyamide recovered from yarn and tyre-cord waste, re-stabilised and reinforced into PA6 and PA66 compounds from 15% to 60% glass fibre, including flame-retardant grades. Black and dark colours.
OpenDeclared recycled content
ReViveX®
PA6, PA66 and PBT/PET compounds with declared post-industrial recycled content, released to the same specification as virgin grades.
OpenHow eCiLON® is made.
- Source
Polyamide waste from yarn and tyre-cord manufacturing, from qualified suppliers with traceable streams.
- Sort and clean
Incoming lots are identified, sorted by polymer and viscosity, and cleaned of contamination before use.
- Re-engineer
Fresh glass fibre, heat stabilisers and additives are compounded in on twin-screw lines to the target specification.
- Test
Every batch is moulded and tested in the Calco laboratory; the test certificate travels with the lot.
- Declare
Recycled-content and material declarations are issued so the part can carry its sustainability claim.
Three things to do when you switch.
Same window as CiLON®
eCiLON® runs on the same drying, melt and mould settings as the equivalent CiLON® grade; no change to the tool or process is normally needed.
Validate on the part
Confirm impact strength, surface finish and colour on the moulded part when switching from virgin material; document the approval against the drawing.
Declare the content
Request the recycled-content declaration with the first lot so the part can carry its sustainability claim in OEM and customer reporting.
Tell us the part and the target.
An application engineer replies with a recommended grade, the data behind it and a free 25 kg trial lot.
