711C1001
Recycled-content PA6, 15% glass fibre
Recycled-content polyamide
The same engineering, a lower footprint.
Polyamide recovered from yarn and tyre-cord waste is sorted, cleaned, re-stabilised and reinforced with fresh glass fibre, then moulded and tested to the same release standards as CiLON®. The result has the rigidity, wear resistance and thermal stability of virgin polyamide, a lower price and a lower carbon footprint, for the many parts where black or a dark colour is acceptable.
Typical parts
India's textile and tyre industries generate a steady stream of polyamide waste. eCiLON® turns that stream into engineering compounds. The PA66 range brings higher stiffness, creep resistance and heat resistance to structural parts, housings and under-hood components where the specification allows post-industrial content.
Ask for the grade data sheet and a recycled-content declaration. Where an OEM material specification exists, we validate the grade against it before release.
What it offers
Recycled-content PA6, 15% glass fibre
Recycled-content PA6, 30% glass fibre, three variants
Typical parts: Fan shrouds, brackets, furniture hardware
Recycled-content PA6, 30% glass fibre, modified
Recycled-content PA6, 50% glass fibre
Recycled-content PA6, 60% glass fibre
Recycled-content PA66, 30% glass fibre
Typical parts: Fan blades
Recycled-content PA6, 20% glass fibre, flame retardant
Recycled-content PA6, 30% glass fibre, flame retardant
eCiLON® runs on the same drying, melt and mould settings as the equivalent CiLON® grade; no change to the tool or process is normally needed.
Confirm impact strength, surface finish and colour on the moulded part when switching from virgin material; document the approval against the drawing.
Request the recycled-content declaration with the first lot so the part can carry its sustainability claim in OEM and customer reporting.
Polyamide waste from yarn and tyre-cord manufacturing, from qualified suppliers with traceable streams.
Incoming lots are identified, sorted by polymer and viscosity, and cleaned of contamination before use.
Fresh glass fibre, heat stabilisers and additives are compounded in on twin-screw lines to the target specification.
Every batch is moulded and tested in the Calco laboratory; the test certificate travels with the lot.
Recycled-content and material declarations are issued so the part can carry its sustainability claim.
| Family | Drying | Max. moisture | Melt temperature | Mould temperature |
|---|---|---|---|---|
| CiLON® / eCiLON® PA6 | 80 °C, 4–6 h | ≤ 0.10% | 240–270 °C | 60–90 °C |
| CiLON® / eCiLON® PA66 | 80 °C, 4–6 h | ≤ 0.10% | 275–295 °C | 70–100 °C |
Starting points for standard reinforced grades. The grade data sheet and, where issued, the product-specific processing sheet take precedence: flame-retardant, high-flow and alloy grades run in narrower windows.
A free 25 kg trial lot compounded on production lines, and a Calco engineer at your press.