Calco Poly Technik

Home / Automotive / Lighting, ADAS and connectivity

Growth programme

Precision housings for electronics.

LED lighting, driver-assistance sensors and connected-car electronics add dozens of precision housings to each vehicle: parts that must hold optical alignment, seal against water, survive heat from electronics and, for anything in the cabin, meet a fire rating. Dimensionally stable PBT and tough, heat-resistant PC alloys are the materials the electronics industry already trusts for the job.

What the material must deliver.

Optical and sensor alignment

Low-warpage PBT and PC/PBT hold the geometry that keeps a camera aligned and a headlamp beam where it belongs.

Heat from electronics

LED drivers and radar modules run warm in closed housings; PBT GF and FR PC alloys keep their properties at the module's service temperature.

Sealing and weathering

Exterior housings are sealed against water and salt and UV-stabilised for exposed surfaces.

Fire rating in the cabin

Display and controller housings are specified to UL 94 V-0; FR PC/ABS delivers it with the impact strength a dashboard part needs.

Our recommendation, application by application.

ApplicationOur recommendationGrades to start fromFamilyStatus
LED headlamp and tail-lamp housingsPBT GF30, PBT/PET GF30: heat and optical alignment730C3001740C3001ZiLITE®In development
Lamp bezels, reflector carriers and trimsPC/ABS, PBT GF20: gloss, paint, low warpage760C6001760C6031730C3001PiCAN® ZiLITE®Ready to specify
LED driver and control-unit housingsPC/ABS FR, PBT GF30 FR: V-0 at electronics temperature760C6081F730C3001FPiCAN® ZiLITE®In development
Camera and sensor housingsPBT GF30, PC/PBT GF10: flat datum, sealing730C3001760C1001ZiLITE® PiCAN®In development
Radar brackets and coversPBT GF30, PC/PBT: stiffness, radar transparency730C3001760C1001ZiLITE® PiCAN®In development
Antenna, telematics and keyless-entry housingsPC/ABS, PBT GF15: RF transparency, impact760C6001730C1031PiCAN® ZiLITE®In development
Display, cluster and infotainment housingsPC/ABS FR, PC/ABS: V-0, grain, impact760C6081F760C6001PiCAN®In development
Switch clusters and control panelsPC/ABS, PA6 GF15: feel, gloss, snap-fits760C6001710C1001PiCAN® CiLON®Ready to specify

In production: grades in series supply for the named part. Ready to specify: validated grades with data sheets and trial quantities available; part-specific validation is run with you. In development: grades, colours and references being built with OEM and Tier-1 partners.

Design and development notes.

Hold the datum

For camera and radar housings, define the optical datum and gate so fibre orientation is symmetric about it; PBT GF30 or PC/PBT in a warm mould gives the flattest part.

Radar transparency

Covers in the radar path need low dielectric loss and uniform wall; unfilled PC or PC/PBT grades are validated at the sensor frequency.

Paint and bond

PC/ABS bezels take paint and adhesive well; PBT needs surface treatment for bonding. Choose the family with the joining process in mind.

Supplied under IATF 16949.

PPAP documentation, IMDS material data and a test certificate with every lot.

Request a sample