Calco Poly Technik

Home / Materials / FlamSaf® / 710C2383F4

FlamSaf®PA6

710C2383F4

PA6, 20% mineral + 5% glass fibre, flame retardant.

Request the data sheet

At a glance.

Family
FlamSaf®
Base polymer
PA6
Construction
PA6, 20% mineral + 5% glass fibre, flame retardant
Colour
Light grey
Typical parts
MCB and RCCB case and cover, isolators
Features
UL 94 V-2 at 3.2 mm, Glow-wire grade, HDT ≥ 150 °C

Where we recommend it

Release window.

From Calco's inspection standard. Every lot is tested against these limits before dispatch.

UL 94HDT °CTensile MPaFlexural modulus GPaDensity g/cc
V-2≥ 15060–804.5–5.51.35–1.41

Test methods: ASTM D638 (tensile at yield, 50 mm/min), ASTM D790 (flexural, 2 mm/min), ASTM D648 (HDT, 1.82 MPa, un-annealed), ASTM D792 (density); UL 94 at 3.2 mm. Source: Calco inspection standards. Values are specification windows and are not a guarantee of properties in a finished part.

Typical starting conditions for moulding.

80 °C, 4–6 hdrying
≤ 0.10%maximum moisture
240–270 °Cmelt temperature
60–90 °Cmould temperature

Starting points for standard reinforced grades. The grade data sheet and, where issued, the product-specific processing sheet take precedence: flame-retardant, high-flow and alloy grades run in narrower windows.

Processing guidelines

Documents for this grade.

Technical data sheet

Typical properties to ASTM and ISO methods, processing conditions and part-marking designation.

Safety data sheet

GHS format, built from the verified composition of the formulation.

Batch test certificate

Measured values against specification limits, issued with every lot.

Declarations

RoHS, REACH, IMDS data and recycled-content declarations where the grade requires them.

Request documents for 710C2383F4

Try 710C2383F4 on your own press.

A free 25 kg trial lot compounded on production lines, and a Calco engineer at your press.

Request a sample