Home / Automotive / Under the hood / Engine covers and cylinder-head covers
In production
Engine covers and cylinder-head covers
The problem this part has to solve, what usually goes wrong, and the grade we recommend.
The problem your part has to solve.
Two parts with the same name and different problems. The decorative engine cover is a large, thin Class-A moulding that sits over a hot engine, carries acoustic foam and snaps onto mounts: it is judged on its surface. The cylinder-head cover is a working part: oil-wetted, at up to 150 °C, integrating the oil separator and PCV, sealed against the head by a gasket that only works if the flange stays flat under bolt load for the life of the engine.
Process: Injection moulding; head covers bolted with limiters over a gasket.
What usually goes wrong
- Sink marks, fibre read-out and gloss variation on the visible engine cover
- Warpage of the head-cover flange that opens the gasket joint
- Embrittlement and cracking after oil and heat ageing; creep at bolt bosses that loses clamp load
- Short shots and weld lines across long, thin decorative walls
Our recommendation.
For decorative engine covers we recommend CiLON® PA6 GF25–30 HF HS, 710C2031 HFHS: the high-flow package fills long thin walls at low pressure and gives the surface aspect a grained Class-A part needs, and the heat stabiliser protects it over the engine. Where the cover sits over the turbo or exhaust manifold, we move to PA66 GF25–30 HF HS, 720C3031 HFHS. For cylinder-head covers we recommend PA66 GF35 HS, 720C3005HS: oil-resistant, heat-stabilised and stiff enough to keep the gasket flange flat. For flatness-critical covers we formulate glass–mineral hybrids that trade a little stiffness for markedly lower warpage.
Why the Calco grade works
- High flow for thin walls and long flow paths at lower injection pressure
- Surface package for low fibre read-out and uniform gloss on grained Class-A skins
- Heat stabilisation for life over the engine; oil resistance for head covers
- Stiffness and creep resistance to hold gasket flatness under bolt load
- Glass–mineral hybrids for low-warpage flanges
Which grade, when.
| Choose when | Calco grade | Construction | Family | What it gives you |
|---|---|---|---|---|
| Decorative engine covers, Class-A surface | 710C2031 HFHS | PA6 GF25–30 HF HS | CiLON® | Flow, surface aspect, heat stabilised |
| Covers over the turbo or exhaust side | 720C3031 HFHS | PA66 GF25–30 HF HS | CiLON® | Higher service temperature, same flow |
| Cylinder-head and cam covers, oil-wetted | 720C3005HS | PA66 GF35 HS | CiLON® | Oil and heat resistance, gasket flatness |
How we validate it with you.
Surface on your grain
Plaques moulded with the customer grain and gloss level, assessed before and after heat ageing.
Flatness and clamp load
Flange flatness on the moulded head cover after oil ageing; bolt-load retention with limiters after thermal cycling.
Oil and heat ageing
Ageing in engine oil and in air at the OEM temperature with tensile and impact retention reported.
More under the hood.
Air intake manifolds
Flange cracking after thermal cycling where weld lines and fibre orientation meet the bolt bosses.
OpenAir filter housings
Latch and hinge fracture once the polymer has embrittled with heat ageing.
OpenRadiator end tanks, cooling pipes and connectors
End-tank cracking at the crimp foot or hose spigot after coolant ageing.
OpenTry it on your own tool.
A free 25 kg trial lot compounded on production lines, and a Calco engineer at your press.
