Calco Poly Technik

Home / Automotive / Under the hood / Radiator end tanks, cooling pipes and connectors

In production

Radiator end tanks, cooling pipes and connectors

The problem this part has to solve, what usually goes wrong, and the grade we recommend.

The problem your part has to solve.

Every wetted part of the cooling circuit sees 50/50 glycol coolant at 100–125 °C under 1.5–2.5 bar, thousands of pressure and temperature cycles, and vibration, for fifteen years. Hot glycol is the hardest environment a polyamide meets in the vehicle: hydrolysis and glycol plasticisation take strength out of standard PA66 GF30, while the end-tank foot has to keep the crimp seal tight as the material creeps. Pipes and quick-connectors add burst, pull-off and O-ring sealing on thin walls.

Process: Injection moulding; end tanks crimped to the aluminium core.

What usually goes wrong

  • End-tank cracking at the crimp foot or hose spigot after coolant ageing
  • Loss of crimp force as the foot creeps and the material softens with absorbed glycol
  • Quick-connector leaks when the sealing bore moves with moisture and temperature
  • Chemical attack from aggressive or wrong-specification coolants

Our recommendation.

Our default for end tanks, pipes and connectors is CiLON® PA66 GF30 HR HS, 720C3004 HSHD: a hydrolysis-resistant, heat-stabilised formulation developed to keep tensile strength and part integrity after coolant ageing. For pipes and fittings that see lower peaks we recommend PA66 GF30 HS, 720C3004 HS. Where the coolant is aggressive, the life target is longer, or the sealing geometry cannot be allowed to move with humidity, we recommend NovaLYN™ mPPE GF30, 620D3031: modified PPE does not hydrolyse, absorbs almost no water, holds the crimp and bore dimensions wet or dry, and is the lightest option in the circuit.

Why the Calco grade works

  • Hydrolysis-resistant stabiliser package proven in end tanks and cooling pipes in series
  • Retention of mechanical properties, part integrity and function after ageing in hot glycol
  • mPPE option that does not hydrolyse and holds dimensions across humidity
  • Toughness at the crimp foot and hose spigot at –40 °C
  • Formulated for the thin walls and cores of pipes and quick-connectors

Which grade, when.

Choose whenCalco gradeConstructionFamilyWhat it gives you
End tanks, pipes and connectors, standard life target720C3004 HSHDPA66 GF30 HR HSCiLON®Strength after coolant ageing, crimp integrity
Pipes and fittings with lower peak temperature720C3004 HSPA66 GF30 HSCiLON®Heat stabilised, cost-optimised
Aggressive coolant, long life, geometry that must not move620D3031mPPE GF30NovaLYN™No hydrolysis, lowest density, dimensional stability

How we validate it with you.

Coolant ageing

Ageing in the OEM coolant at the specified temperature, typically 1,000 hours at 120–130 °C, with tensile and impact retention reported.

Burst and pressure cycling

Burst on the crimped tank and on connectors before and after ageing; pressure cycling with thermal shock.

Crimp and seal geometry

Crimp-force retention and sealing-bore dimensions measured dry, conditioned and after ageing.

Try it on your own tool.

A free 25 kg trial lot compounded on production lines, and a Calco engineer at your press.

Request a sample